120 Webster   Memphis, TN 38126      Phone: 800.860.1850     901.527.8671      Fax: 901.526.2339

Mill Page

	5' x 1/4" Roll Starting at $13,990.00 FOB Memphis	Ironworkers Starting at $12,990.00 FOB Memphis	Press Brakes 155x13      $39,990.00 FOB Memphis	Shears 10'x1/4      $24,990.00 FOB Memphis

STANDARD FEATURES AND EQUIPMENT:

·         Large 10” x 54” table with 3 T-slots, 5/8”, on 2.5” centers

·         Large knee allows saddle to travel over 15” for crossfeed

·         Large ram allows for over 21” travel with throat from 5.5” to 26.75”

·         Large Square Ways on Y and Z Axis…………. Double locks on all axis

·         Power quill feed allows for 0.0018, 0.0034, 0.0056 Inches per revolution

        of spindle

·         Hardened and ground and precisely scraped work table, saddle and

        knee ways

·         Centralized one-shot lubrication pump lubricates all way surfaces and

        leadscrews

·         Backlash adjustment for leadscrews,  Gib adjustments for ways,

·         Precision NSK spindle bearings

·         Electrical cabinet with internal transformer with 24 volt fuse protected

        controls, 24 volt spindle fan cooling motor, 24 volt halogen machine light.  
        Also has Telemechinique magnetic contactors for flood coolant pump and 
        spindle drive.  Internal transformer also includes power supply for digital 
        readout and power table feed. Operator 24 volt controls for spindle drive 
        and coolant pump, with emergency stop button.  Spindle off/forward/reverse switch. 

·         Built in coolant tank base with coolant pump, pressure and return hose , nozzle and valve

             Installed and ready to use. 

·         Yaskawa infinitely variable speed spindle drive, 5 Horsepower (3.7Kw) powers the three

      phase induction spindle drive motor from 60 to 2200 RPM for 100% duty cycle.  Drive

      comes preset to 60Hz and can be easily set  to 140Hz for up to 5500 RPM, intermittent duty

      cycle.  Spindle induction motor is finned for cooling and has 24 volt fan cooling system. 

·         Kent KT-8 three axis digital readout has 0.0002” resolution.  Readout comes mounted to

      quill, table and cross and is ready to use.  The readout is inch/metric switchable, with absolute

      incremental function.  There is a calculator function, bolt hole pattern function, line pattern

      function, and arc calculate function.  A comprehensive manual is included. 

·       Power table feed is Align model AL500SX.  Infinitely variable feed from .8 to 32 IPM with rapid button,

      on/off switch, and adjustable travel stops.  This heavy duty power feed has 150 inch pounds of torque, with

      max to 550.  Power table feed comes installed on machine, ready to use.

120 Webster Ave.    Memphis, TN    38126    Phone: 800-860-1850    901.527.8671    Fax: 901-526-2339

Top of Page

Created by Hal Murrell                   Last Revision: 06/26/2008
10-18-99