120 Webster   Memphis, TN 38126      Phone: 800.860.1850     901.527.8671      Fax: 901.526.2339


Radial Arm Drill 

Click on photos below for complete list of sizes and specifications

 

5' x 1/4" Roll
Starting at $13,990.00
FOB Memphis

 Ironworkers
Starting at $12,990.00
FOB Memphis		 Press Brakes
155x13      $39,990.00
FOB Memphis		 Shears
10'x1/4      $24,990.00
FOB Memphis

Click here for a specification sheet
In order to print out specification sheet you must have  Adobe Acrobat®  on your hard drive. If you need the file, download by selecting the link on the home page.

Specifications:      
Model 39-9 63-14 79-18
Max. Drilling Diameter  1.25"  2" 2.5"
Distance Between Spindle Axis:
Maximum 39.4"
Minimum   17.7"		  

39.4"
12"

  

63"
13.78"

  

79"
13.78"
Distance between Spindle Nose and
Working Surface of Base Plate:
Maximum
Minimum  		  

38.98"
8.07"

  

48"
12.6"

  

63"
15.7"
Spindle Travel   11" 12.4" 15.7"
Spindle Taper  #4 #5 #5
Range of Spindle Speeds (r/min.) 32-2500 25-2000 20-1600
Number of Spindle Speeds 16 16 16
Range of Spindle Feeds (in/min.) .003-.04 .0016-.125 .0016-.125
Number of Spindle Feeds 8 8 16
Table Size  20"x20" 20"x31" 25"x31.5"
Column Diameter 9.5" 13.7" 17.7"
Arm Length   56" 84.25" 104"
Power of Main Motor 3 HP 5.5 HP 7.5 HP
Net Weight ( Lbs.)  3520 7700 15,400
Overall Dimensions:
Length  
Width 
Height  		  

69.3"
31.5"
90.5"

  

98.4"
41.7"
104.5"

  

121"
49"
130"

 

120 Webster Ave.    Memphis, TN    38126    Phone: 800-860-1850    901.527.8671    Fax: 901-526-2339





Top of Page

Created by Hal Murrell                   Last Revision: 05/29/2008
10-18-99