120 Webster   Memphis, TN 38126      Phone: 800.860.1850     901.527.8671      Fax: 901.526.2339


Radial Arm Drill Page 2

Click on photos below for complete list of sizes and specifications

 

5' x 1/4" Roll
Starting at $13,990.00
FOB Memphis

 Ironworkers
Starting at  $12,990.00
FOB Memphis		 Press Brakes
155x13      $39,990.00
FOB Memphis		 Shears
10'x1/4      $24,990.00
FOB Memphis

Click here for a Specification Sheet
In order to print out specification sheet you must have  Adobe Acrobat®  on your hard drive. If you need the file, download by selecting the link on the home page.

Specifications:      
Model 98-22 124-28 157-32
Max. Drilling Diameter  3.125"  4" 5"
Distance Between Spindle Axis:
Maximum 39.4"
Minimum   17.7"		  

98.4"
19.7"

  

124"
22.4"

  

157.5"
23.6"
Distance between Spindle Nose and
Working Surface of Base Plate:
Maximum
Minimum   		 

78.7"
21.6"

  

98.4"
29.5"

  

98.4"
29.5"
Spindle Travel   17.7" 19.7" 22"
Spindle Taper  #6 #6 Metrie 80
Range of Spindle Speeds (r/min.) 16-1250 8-1000 6.3-800
Number of Spindle Speeds 16 22 22
Range of Spindle Feeds (in/min.) .0016-.125 .0023-.126 .0023-.126
Number of Spindle Feeds 16 16 16
Table Size  31.5"x40" 31.5"x49" 31.5"x49"
Column Diameter 21.65" 27.56" 31.5"
Arm Length   124" 159" 195"
Power of Main Motor 10 HP 20 HP 25 HP
Net Weight ( Lbs.)  24,200 44,000 62,700
Overall Dimensions:
Length  
Width 
Height   		 

147"
55"
158"

  

188"
64"
186"

  

229"
79"
202"

 

120 Webster Ave.    Memphis, TN    38126    Phone: 800-860-1850    901.527.8671    Fax: 901-526-2339





Top of Page

Created by Hal Murrell                   Last Revision: 05/29/2008
10-18-99