U.S. Industrial Surface Grinders
WE ARE EXTENDING SPECIAL END-OF-YEAR PRICING ON ALL U.S. INDUSTRIAL SURFACE GRINDERS!
RECEIVE 10% OFF ON ALL SURFACE GRINDER MODELS SHOWN BELOW FROM 12/07/18 TO 01/31/19
Standard Features
|
 |
| U.S. Industrial Surface Grinder Models | ||||
| USG618A-S (View PDF) | USG618S-SD (View PDF) | USG1022-SY (View PDF) | USG1224-SY (View PDF) | |
|---|---|---|---|---|
| Two-Axis Readout Included | Yes | Yes | Yes | Yes |
| Type of Operation | All Manual | Electric Recip. and Elec. Cross | Hydraulic Recip., Elec. Cross | Hydraulic Recip., Elec. Cross |
| Slideway Type | V Rail With Ball Track | V Rail With Ball Track | Double V Type Rail | Double V Type Rail |
| Machine Lube System | One-Shot Manual | One-Shot Manual | Part of Hydraulic System | Part of Hydraulic System |
| Manual Operation of Recip. | Yes, Handwheel Only | Handwheel Plus Elec. Motor | No, Hydraulic Only | No, Hydraulic Only |
| Wheelhead Movement | Handwheel, Manual | Handwheel, Manual | Handwheel, Manual | Handwheel and Power Elevation |
| Wheelhead Dial Graduation | .0002" | .0002" | .0002" | .0004" |
| Permanent Magnetic Chuck Included | 5.9" x 15.75" | 5.9" x 15.75" | 9.8" x 19.7" | 11.8" x 23.6" |
| Pole Spacing of Mag. Chuck | 0.125" | 0.125" | 0.125" | 0.090" |
| Table/Cross Travel Max | 18" x 7" | 18" x 7" | 22" x 10.2" | 24.8" x 12.6" |
| Cross Dial Graduation | 0.0005" | 0.0005" | 0.0005" | 0.0005" |
| Grinding Wheel Supplied | 7" x 1/2" - 1.25" Hole | 7" x 1/2" - 1.25" Hole | 8" x 3/4" - 1.25" Hole | 12" x 1-1/4" - 3" Hole |
| Dist. Under Wheel to Chuck | 7-1/2" | 7-1/2" | 10" | 11-1/2" |
| Wheel Balancing Arbor/Base | Yes - Included | Yes - Included | Yes - Included | Yes - Included |
| Over Wheel Diamond Dresser | NO - Table Dresser | Yes - Included | Yes - Included | Yes - Included |
| Work Light | Included | Included | Included | Included |
| Spindle RPM | 3360 | 3360 | 3360 | 1680 |
| Spindle HP | 2 HP | 2 HP | 2 HP | 3 HP |
| Hydraulic System | NA | NA | 2 HP - 21 Gallons | 3 HP - 27 Gallons |
| Coolant Pump - Tank Size | 40 Watt - 9 Gallons | 40 Watt - 9 Gallons | 40 Watt - 9 Gallons | 40 Watt - 9 Gallons |
| Voltage | 220/440, 3 Phase | 220/440, 3 Phase | 220/440, 3 Phase | 220/440, 3 Phase |
| Full Load Amps @ 220 Volts | 4 | 6 | 20 | 20 |
| Gross Weight | 1,690 lbs. | 1,690 lbs. | 2,300 lbs. | 3,400 lbs. |
| Shipping Dimensions (LxWxH Inches) | 40x45x70" | 40x45x70" | 48x66x73" | 56x72x76" |
| Price F.O.B. Memphis, TN: | $6,995.00 | $8,995.00 | $14,495.00 | $18,990.00 |
| Magnetic Chuck | Digital Readout | Accessories | Electrical Cabinet |
|---|---|---|---|
 |
 |
 |
 |
Give us a call at 800-860-1850.
U.S. Industrial Machinery Warranty Policy
PLEASE NOTE:
Our machines are shipped without oil. Please refill the oil before operating the machine.
Also remember that the machines must be anchored and leveled, or the warranty may be voided.
Full 220V or 440V is required. Low voltage may hinder operation of or damage the machine.
Resources
Adobe Acrobat Reader
Click hereU.S. Industrial Shear and Brake Users
Click hereSection 179 Permanent Machinery Tax Incentive
Click hereNeed good CAD drawing software? Try BobCAD; click below.
^Back To Top^
From Nashville
From I-40 Take I-240 West
Follow Signs to Little Rock, AR
Take I-40 West toward Little Rock, AR
Take Danny Thomas Blvd. Exit South
Take a Right on Crump
Take a Right on South Main St.
Go Thru One Light on South Main
Take a right on St. Paul
1st Metal Building on the Right
From Little Rock
Take I-40 East
Take I-55
Go Across Old Bridge
Go to second red light
Take a Left on South Main
Go Thru One Light on South Main
Take a right on St. Paul
1st Metal Building on the Right
From Hwy 78
Take 78 to I-240
Take I-240 West
Take I-55 N
Take the Crump Exit
Go to second red light
Take a Left on South Main
Go Thru One Light on South Main
Take a right on St. Paul
1st Metal Building on the Right
From I-55 Mississippi
Take I-55 N towards St. Louis
Take the Crump Exit
Go to second red light
Take a Left on South Main
Go Thru One Light on South Main
Take a right on St. Paul
1st Metal Building on the Right
Do you need a quote or information about sales? If so, send an email to David@machinery-sales.com
Do you have questions about this site? If so, send an e-mail to Sean@machinery-sales.com
Do you have questions about our products? If so, call 800.860.1850.