U.S. Industrial Rolls
Standard Features
- Powered Roll Adjustment
- Precision Pinch Roll Adjustment
- Top Roll Swing Out
- Emergency Trip Line
- Pedestal Control
- Quick Roll Adjustment
- Roll Position Indicators
- Crowned Rolls
- High Torque Gear Box
- Low Voltage Push Button Controls
| U.S. Industrial Roll Models | ||||
| 5' x 1/4" (View PDF) | 6' x 1/4" (View PDF) | 8' x 1/4" (View PDF) | 10' x 1/4" (View PDF) | |
|---|---|---|---|---|
| Capacity | 5' x 1/4 Mild Steel @ 65000 PSI | 6' x 1/4 Mild Steel @ 65000 PSI | 8' x 1/4 Mild Steel @ 65000 PSI | 10' x 1/4 Mild Steel @ 65000 PSI |
| Pre Bend Capacity | 1/4" Mild Steel @ 65000 PSI | 1/4" Mild Steel @65000 PSI | 1/4" Mild Steel @65000 PSI | 1/4" Mild Steel @ 65000 PSI |
| Roll Diameter | 6.7" on all 3 rolls | 6.7" on all 3 rolls | 7.4" Rolls | 7.4" Rolls |
| Speed | 12.5 F.P.M. | 12.5 F.P.M. | 12.5 F.P.M. | 19 F.P.M. |
| Main Drive Motor | 5.5 HP Gear Reduction Drive | 5.5 HP Gear Reduction Drive | 5.5 HP Gear Reduction Drive | 5.5 HP Gear Reduction Drive |
| Adjustment Motor | 3 HP | 3 HP | 3 HP | 3 HP |
| Machine Length | 127" | 144" | 160" | 177" |
| Machine Width | 54" | 54" | 54" | 54" |
| Machine Height | 44" | 44" | 44" | 44" |
| Net Weight | 4150 lbs | 6800 lbs | 8025 lbs | 9250 lbs |
| Voltage | 220/440 3 PH | 220/440 3 PH | 220/440 3 PH | 220/440 3 PH |
| Price: | $13,990.00 | $16,990.00 | $23,990.00 | $30,990.00 |
| Options: | ||||
| Hardened Rolls | $ 995.00 | $ 995.00 | $1,295.00 | $1,495.00 |
| Cone Rolling Attachment | $ 695.00 | $ 695.00 | $ 695.00 | $ 695.00 |
| LED Readout/with memory | $1,995.00 | $1,995.00 | $1,995.00 | $1,995.00 |
| Total Price: | $17,675.00 | $20,675.00 | $27,675.00 | $34,675.00 |
Roll Videos
In the following video, our Service Manager, Volon Sexton, explains the saftey features and operations of the U.S. Industrial Roll.
PLEASE NOTE:
Our machines are shipped without oil. Please refill the oil before operating the machine.
Also remember that the machines must be anchored and leveled, or the warranty may be voided.
Full 220V or 440V is required. Low voltage may hinder operation of or damage the machine.
Resources
Adobe Acrobat Reader
Click hereU.S. Industrial Shear and Brake Users
Click here2011-2012 Machinery Tax Incentives
Click here^Back To Top^
From Nashville
From I-40 Take I-240 West
Follow Signs to Little Rock, AR
Take I-40 West toward Little Rock, AR
Take Danny Thomas Blvd. Exit South
Take a Right on Crump
Take a Right on South Main St.
Go Thru One Light on South Main
Take a right on St. Paul
1st Metal Building on the Right
From Little Rock
Take I-40 East
Take I-55
Go Across Old Bridge
Go to second red light
Take a Left on South Main
Go Thru One Light on South Main
Take a right on St. Paul
1st Metal Building on the Right
From Hwy 78
Take 78 to I-240
Take I-240 West
Take I-55 N
Take the Crump Exit
Go to second red light
Take a Left on South Main
Go Thru One Light on South Main
Take a right on St. Paul
1st Metal Building on the Right
From I-55 Mississippi
Take I-55 N towards St. Louis
Take the Crump Exit
Go to second red light
Take a Left on South Main
Go Thru One Light on South Main
Take a right on St. Paul
1st Metal Building on the Right
Do you need a quote or information about sales? If so, send an email to David@machinery-sales.com
Do you have questions about this site? If so, send an e-mail to Sean@machinery-sales.com
Do you have questions about our products? If so, call 800.860.1850.
Created by Sean Eastman 5/13/2011